How to simply assemble an Olle metal garden bed?

Olle Metal Garden Bed is a popular outdoor furniture that is not only aesthetically pleasing but also durable, suitable for placement in outdoor spaces such as gardens, balconies, and terraces. For first-time users of Olle metal garden beds, they may be confused about their assembly, but in reality, assembling Olle metal garden beds is very easy. This article will provide a detailed introduction to the steps and precautions for assembling the Olle metal garden bed.

Step 1: Preparation

Before starting to assemble the Olle metal garden bed, all necessary tools and materials need to be prepared. Usually, you need a wrench, a screwdriver, a rubber hammer, some screws and nuts, and an Olle metal garden bed accessory kit.

Step 2: Install the framework

Firstly, you need to place the frame of the Olle metal garden bed on the ground and secure the two side panels together according to the instructions in the manual. During this process, you need to use a wrench and screwdriver to tighten the screws and nuts to ensure that the frame structure is secure.

Step 3: Install the middle crossbar

The Olle metal garden bed does not have support rods, and the design and weight testing of the Olle garden bed are shown in the chart. We indicate that it is sturdy and does not require internal support rods. If the length or width of the garden bed expands beyond the dimensions shown, support rods may be required. Insert the middle crossbar of the Olle metal garden bed into the slot between the two side panels. If you find it difficult to insert, you can gently tap the bottom of the crossbar to ensure it is inserted correctly.

Step 4: Install the base plate

The Olle metal garden bed does not have legs or a leaking bottom, so the bottom plate needs to be installed on the frame to support the flower pot or plants. Before installing the base plate, you need to first secure the screws and nuts in the accessory package to the base plate, then place the base plate on the frame and secure it with the screws and nuts.

Step 5: Check and Adjust

Finally, you need to check each connection point of the Olle metal garden bed to ensure that they are properly secured. If you notice a loose connection point, you can use a wrench and screwdriver to adjust it until it is secure.

In addition, to ensure the smooth and successful installation process, you also need to pay attention to the following items:

Carefully read the instruction manual. Before starting assembly, please carefully read the instructions for the Olle Metal Garden Bed to ensure that you understand every step and detail.

Check the accessory package. Before assembly, please ensure that all components in the accessory package are complete and not damaged or missing.

Choose a stable ground. The Olle metal garden bed needs to be placed on a stable ground to ensure its stability and safety.

Use appropriate tools. Using appropriate tools can help you assemble the Olle metal garden bed more easily and avoid the risk of damaging components or injuring hands.

Pay close attention to installation details. During the installation process, please pay special attention to the details of each connection point and ensure that all screws and nuts are tightened in place.

How fast is it to clean and reassemble a metal raised garden bed?

Olle's metal elevated garden bed is bottomless, so when filling, you can place different organic pads to prevent insects and weeds. Generally speaking, organic materials such as cardboard boxes and fabrics will slowly decompose over time, which may take several months to several years. Therefore, you need to replace the gasket after a period of time.

Assembling the garden bed takes about half an hour, and disassembling it only takes about 10 minutes. In addition, the metal elevated bed is coated with zinc aluminum magnesium alloy to ensure that the interior of the garden bed does not rust. Therefore, after disassembly, simply rinse the panel and fasteners to obtain a clean elevated bed!

In short, assembling the Olle metal garden bed is a very simple task, as long as you follow the steps in the manual and pay attention to some details, it can be completed quickly. After assembly, you can enjoy the comfort and beauty brought by the beautiful garden bed.