website

frequently asked questions.

Find everything you need to know about our products here, if you need more help, please contact us at info@ollegardens.com

Product

Materials & Safety

Shipping & Refund 

assembly tips.

panels.

  • Start with corner panels (or a corner and a straight panel) on two ends, build them from the ends and connect them in the middle. 
  • Combine two panels with the bolts, washers and nuts only at the top and bottom opening (in the middle opening as well for 32" Tall Garden Beds) of the panel. Tighten them loosely (hand-tight) and continue this process until you have your desired configuration.
  • Once you have the complete shape, put in the remaining bolts, washers and nuts.

bolts, 

washers, and nuts.

  • Pinch the panels together at the top and start tightening the bolts from the top towards the bottom. 
  • Use a ratchet/drill/closed-in wrench to quicken the process. The nuts are 10mm in diameter.   

rubber safety stripping.

  • As you install the rubber safety stripping (edging), pull the strip to stretch it a little. 
  • You can use the back of the wrench we provide or a screwdriver to slightly open the channel of the rubber stripping so it slips on more easily where the panels overlap. A hair dryer may also do the trick. 

Peel the film along the sides of the panel to make it easier to remove the film

Assemble the panels starting with the corners

Use a ratchet or drill to quicken the process of tightening the bolts 

Use a screwdriver to slightly open the channel of the rubber stripping

Peel the film along the sides of the panel to make it easier to remove the film

Assemble the panels starting with the corners

Use a ratchet or drill to quicken the process of tightening the bolts 

Use a screwdriver to slightly open the channel of the rubber stripping

Vegetable Garden Planning: Choosing Vegetables to Grow